Automatic Multi‑core Cable Sheath Double‑end Terminal Machine

4dhcpmingchen

Location: Home -> Products -> Automatic terminal machine series -> Automatic Multi‑core Cable Sheath Double‑end Terminal Machine

[Back] [BACK]

[Previous] [Next]

Detail

Product Video
Product video

Main Equipment Configuration
Main Equipment Configuration

1. Motion control card
2. Sensor: Taiwan Jiazhun
3. Control system servo motor (7 sets): Japan Mitsubishi
4. Control system servo motor driver (7 sets): Japan Mitsubishi
5. Auxiliary system stepper motor (6 sets): Xuquan
6. Auxiliary system stepper motor driver (6 sets): Servo Electromechanical
7. Crimping motor 0.75KW (2 sets): Baogema
8. Touch screen: Buke (Kinco)
9. Cylinder: Taiwan Yadeke (AirTAC)
10. Solenoid valve: Domestic high-quality
11. Screw: Taiwan TBI
12. Linear guide: Taiwan Hiwin

Feature Description:
Feature Description 1. The equipment's translation, wire cutting, stripping and other motions are driven by servo motors driving screws or gears, achieving higher precision and stability compared with the traditional fully stepper-motor-driven synchronous belt; meanwhile, stepper motors are used where low speed and high torque are needed, achieving optimal performance.
2. Controlled by the main machine's motion control card, with Chinese/English touch screen parameter setting, short adjustment time and easy operation.
3. Suitable for horizontal-feed and straight-feed OTP terminal molds.
4. Energy-saving, space-saving, and environmentally friendly equipment.

Product Parameters
Product parameters

Function:	Sheathed wire cutting, outer skin stripping, inner core cutting, inner skin stripping, both-end stripping; one end optional outer skin stripping / inner core cutting / inner skin stripping / crimping, the other end optional outer skin stripping / inner core cutting / inner skin stripping / crimping; stripping length / crimp position / tube insertion length can be set and adjusted
Wire Range:	Outer diameter 3-8mm, inner core AWG28-20
Production Capacity:	750 pcs/hour (depending on wire specification and length)
Cutting Accuracy:	Wire length below 150mm error 0.5+(wire length x0.002)
Processing Length:	180-99999mm
Stripping Length:	Outer skin 30-150mm, inner core 2-10mm
Detection Device:	Wire knot detection (requires coordination with pay-off stand), wire shortage detection (requires coordination with pay-off stand), terminal presence detection, terminal pressure detection, air pressure detection
Power Supply:	Single phase AC200V~250V 50/60Hz 10A
Compressed Air:	0.5 MPa(5kgf/cm²) clean dry gas
Machine Dimensions:	130010201520mm (excluding terminal rod and other accessories)
Machine Weight:	Approx. 750KG

Detail