Working principle of computer wire stripper:
1、 Brief introduction to the functions of main components:
1 incoming wire wheel: conveying wire rod and stripping wire head. When stripping the short wire, the wire stripping machine can strip both the wire head and the wire tail (the wire length is less than 50 mm). When stripping the short wire, the wire stripping machine can strip the wire head as well as several places in the middle.
2 outgoing line wheel: it is used to transport wire rod and strip outgoing line tail for wire stripper. (the stripping machine has no function in stripping short wires, so it is necessary to make the "outlet wheel lifting knob" at the "U" position.)
3. Adjustment knob of wire wheel clearance: adjust the wire wheel clearance of wire stripper, increase the turning clearance upward, and decrease the turning clearance downward (adjust according to the thickness of wire).
4. Wire stripper inlet wheel pressure adjustment knob: adjust the inlet wheel pressure of wire stripper. After pulling out, rotate clockwise. The inlet wheel pressure increases. After pulling out, rotate counterclockwise. The inlet wheel pressure decreases. (it is determined according to the wire skin strength, that is to say, it is difficult to peel the wire, if it is difficult, the pressure will increase, if it is easy, the pressure will decrease.)
5. Wire feed wheel lifting knob: when threading the wire stripper, lift the wire feed wheel, turn the knob clockwise to lift the wire feed wheel so as to pass through the wire smoothly; when working, lower the wire feed wheel, turn the knob counterclockwise to lower the wire feed wheel and press the wire.
6 adjustment knob for clearance of outgoing line pulley: to adjust clearance of outgoing line pulley for wire stripper, increase the turning clearance upward and decrease the turning clearance downward (adjust according to the thickness of wire).
7 outlet wheel pressure adjusting knob: to adjust the outlet wheel pressure of wire stripper, rotate counterclockwise after pulling out, the outlet wheel pressure increases, rotate clockwise after pulling out, and the inlet wheel pressure decreases. (it is determined according to the wire skin strength, that is to say, it is difficult for the wire stripping machine to peel the wire. If it is difficult, the pressure will increase, and if it is easy, the pressure will decrease.)
8. Outlet wheel lifting knob: when taking out the wire, lift the outlet wheel, turn the knob anticlockwise to lift the outlet wheel, so as to take out the wire smoothly; when working, lower the outlet wheel, turn the knob clockwise to lower the outlet wheel. (when the short stripping procedure is used, the outlet pulley shall be lifted)
9 tool holder assembly: in the wire stripping machine, it is responsible for cutting the wire rod, stripping the head and tail. When the machine is stopped, the upper and lower blades need to be opened to the maximum so that the wire rod can pass through the tool smoothly.
Related search: computer cutting machine terminal machine ultra quiet terminal machine
For more information, please visit www.87296802.com