Daily maintenance method of terminal press:
Terminal machine maintenance is divided into daily maintenance and secondary maintenance. Here is a brief introduction to its daily maintenance methods.
The maintenance of terminal machine on weekdays can be carried out according to the following steps:
1. Generally, the stamping guide rail of terminal machine must be lubricated with oil once every 1-2 hours. The oil filling hole is at the top of the terminal. The oil filling should not be too much each time, and 2-3 drops is appropriate;
2. The operator shall clean the machine every day to remove the sundries, dust and excess oil on the surface of the machine;
3. Finally, grease the main speed bearing of terminal machine every week: open the rear cover of terminal machine → remove the circlip of driven pulley → remove the pulley → apply grease (evenly on the surface of high-speed bearing) → restore (Note: pay attention to the loss of bearing ball during the removal of pulley).
Related search: wire stripping machine computer wire cutting machine automatic terminal pressing machine
For more information, please visit www.87296802.com